Skip to main content

SSC Service Utility Software to reset Epson printers


SSC Service Utility allow to do many things with Epson printer :


- Work directly with CSIC in Epson Stylus printers cartridges.
- Reset or rewrite any chip using special addon device.
- Freeze internal ink counters.
- Reset internal ink counters even with empty cartridges.
- Separate cleaning of color and black heads for all Epson inkjet printers, powerful cleaning mode.
- Hot swapping of cartridges supported.
- Resetting of protection counter.
- More then 100 different Epson printers supported


The site: http://www.ssclg.com/epsone.shtml

Download the 4.30 version


Printers you can reset with SSC utility:

Epson Stylus Сolor 400/440/480 LPT/480SXU/580/600/640/660/670/680/777/740/760/ 800/850/860/880/900 / EM-900C/980/1160/1520/3000
C20 / C40 / CL-750/C41 / C42 / C43 / C44 / C45 / C46 / C47 / C48/C50/C60/C61
C62 /C63 / C64 /C65 / C66/C67 / C68 / D68/C70/C80/C82/C83 / C84/C85 / C86/C87
C88 / D88 and PE
Photo RX420 / RX425 / RX430 /RX500 / RX510/RX520/RX600 / RX610/RX620/RX700 CX3100 / CX3200/CX3500 / CX3600 / CX3650/CX3700/CX3800 / CX3810 / DX3800/CX4500 CX4600/CX4100 / CX4200 /CX4700 / CX4800/DX4200 / DX4800 /CX5100 / CX5200 /CX5300 / CX5400 CX6400 / CX6600 /CX6300 / CX6500 /CX7800 Photo /Photo EX /Photo 700 / IP-100/750 / PM-770C /780 / 790 /
PM-780C /810 / 820
Photo 820 /825 / 915/830 / 830U/870 / PM-875DC /R200 / R210/R220 / R230
R300 / R310 / Photo R320/R800 / PX-G900/R1800/R2400/890/PM-890C/PM-A700
PM-G720/PM-970C/895/ 785EPX
Photo 900 /925 / 935/ 950 / 960 / PM-950C/1200 / PM-3000C/1270 / PM-3300C/1280 / PM-3500C
Photo 1290/2000P/2100/2200 / PM-4000EPX/Pro 5000 / PM-5000C


Troubleshooting:
Link:

Comments

Anonymous said…
I have Epson WF7511, it's error, the result is shadowing, or not clear th copy or the print page. do anyone can help me?
bkolnik said…
And reset for Eps stylus rx 595 exists? Or can I use reseter for other printer?
J.Lassalle said…
Hi bkolnik,

For RX595, try this:
http://fix-your-printer.blogspot.com/2014/09/activation-key-for-resetting-waste-ink.html
Anonymous said…
I replaced waste ink pad on Epson Workforce 633 - very easy. I ran the reset utility from Epson successfully but the message continues on the display that the ink pads are nearing the end of their service. I'm on a PC with Windows 7. I've turned the machine off and left it off for a while and the message continues. Any ideas on how to solve this?
J.Lassalle said…
Hi,

Try this for Epson Workforce 633:
http://fix-your-printer.blogspot.fr/2013/01/an-officiel-reset-utility-for-some.html
Anonymous said…
It works for WorkForce 633! Thank You!
Cari Plotter said…
Thank you for sharing, it's really helped me...
Very nice article...
I like this article, can add knowledge to every person who read it, thanks
Dave Cabuyadao said…
I have Epson L210 series. Can i use the SSC service utility for it? If so, which one should i click under Printer Model? Please help.
J.Lassalle said…
Hi Dave,

I don't think that SSC works for Epson L210.

Try this, but you have to buy a reset key:
http://www.2manuals.com/product_info.php?products_id=1149
OldBooksOnDisc said…
I have an Epson XP-800, just once it has displayed "Ink Pad Nearing End Of Life", does anyone know if there's a reset key available?
Many thanks in advance, Chris.
J.Lassalle said…
Hi Chris,

You will find some tips pour XP-800 here:
http://www.printerknowledge.com/threads/how-to-reset-xp-800-waste-ink-pad-warning.8428/
Anonymous said…
Hi!. how can i reset Epson L120? please help...
J.Lassalle said…
Hi,

More informations here for Epson L120:
http://fix-your-printer.blogspot.fr/2013/01/how-to-fix-error-e-91-or-e91-on-epson.html
Anonymous said…
Hi,

How do i reset my epson stylus c62? downloaded the ssc but it just keeps stating printer off when i try any command on it , thank you
J.Lassalle said…
Hi,

For "printer off" try this:
http://fix-your-printer.blogspot.fr/2013/12/how-to-solve-error-message-printer-off.html
Blare said…
Hi!

Any solution for WF-2510 without buying a reset key?

Thanks!
Epson L210 said…
Hello Jann

Is there any solution to reset epson printer l210 ?

Thanks
Epson L210 said…
I'm sorry, I saw the solution! Thank you
Unknown said…
Hi does it work with epson xp820? Any help would be appreciated. Thanks
J.Lassalle said…
Hi Elphie,

Try solution 3 et 4 here:
http://fix-your-printer.blogspot.fr/2013/04/how-to-reset-waste-ink-pad-counter-on.html
Ken said…
Hi Jann,
Will the SSC SU work to reset my Epson XP420, so my 220 ink cartridges will work after refilling them with a refill kit? Thanks!
Ken
J.Lassalle said…
Hi Ken,

The SSC su will reset only the waste ink counter (and it doesn't work for XP420).

If you want to reset your cartridges, you need to buy some chips or a chip resetter.
Unknown said…
Hi!

I have an Epson Stylus CX3650, all the lights are flashing and i have an 'E' on the display. I used SSC Service Utility 4.3v but a message appeared on th screen: "Printer off or some other problem!. How can I fix it? Thanks
J.Lassalle said…
Hi Zahira,

Try this:
http://fix-your-printer.blogspot.fr/2013/12/how-to-solve-error-message-printer-off.html
Unknown said…
How can i reset my epson stylus rx520?
J.Lassalle said…
Hi Giorgio,

With SSC Service utility you can reset your RX520.
Unknown said…
I have an Epson Workforce 500 attached to a UBUNTU System, is there a way to reset the ink pad full error?

Thanks
-Steve
Unknown said…
Hi, I have a Epson WF-4630 pro and need to reset my printer counter as I have changed cartridges but the counter does not change. I have used wicreset to change the firmware but they do no do the reset counter.... can you help ? I am willing to pay or donate if you can help me out.

Thanks, Rude
J.Lassalle said…
Hi Rude,

What is the message or error code ?
Unknown said…
Hi, thanks for getting back to me. The problem is as the printer cartridge level goes down and I change the cartridge using a 3rd party cartridge the ink level on the screen stays at the same level even though there is a new full cartridge unless I use a genuine cartridge. I think I need to be able to reset the ink levels. I used Wicreset to downgrade my firmware so as I can use 3rd party cartridges but at the moment they do not reset ink levels. Any help you can give me would be greatly appreciated.

Regards, Rudy Snep
J.Lassalle said…
Hi Rude,

You probably have to buy a new key to reset the ink level.
Pedro said…

Good morning, I get an error message E-91 on the EPSON Stylus Photo R240, according to the Internet It means "Waste Ink Pad", that the pads are saturated.
You must clean them and reset the machine with a reset program.

Can you help me?

Thank you.
J.Lassalle said…
Hi Pedro,

You will need to buy a software to do the reset:
http://fix-your-printer.blogspot.fr/2013/01/how-to-fix-error-e-91-or-e91-on-epson.html

Popular posts from this blog

How to fix error B200 on canon Printers

MAJ11/06/17 Error B200 means the printhead voltage or temperature is not normal. The Printhead could be defective.... but first, try these solutions below: Solution 1 : Disconnect the power cable from the printer. Wait 1 hour. Connect the power cable Solution 2 : Check and Clean Head contact pin condition of the carriage unit Check Cable connection especially the carriage FFC Solution 3 : Turn off the power Open the panel Turn on the power Wait for print carriage to start moving to the left. Let it go past half way Before print carriage reaches left hand side shut the cover. Leave the Printer turned on Solution 4 : Unplug the power cable. Open the printer Push the whole print head mechanic to the center While the printer still open, plug the power and turn it ON.  When the printhead still moving and is going to the very LEFT, close the cover.  Wait until its boot up.  Solution 4a: Take out all of the ink cartridges Lift up the gr

How to solve error code 006 with Canon Service Tool V3400

MAJ 25/08/17 The Service Tool V3400 allow to reset the counter of some Canon printers. For the error code 006 , try this : Solution 1: Check your cartridges: an empty cartridge can lead to error 006 Solution 2 : After you avec clicked on "Main", wait a few minutes.  If the error still here, restarts the Service Tool Solution 3 : Close the service tool Disconnect the USB cable from the printer After 10 seconds, plug back the cable to the printer On Windows, click next when appears "New device" Open the service tool

How to solve error B204 on Canon Maxify printers

The error B204 could happen after a cartridge replacement. First of all, when installing, remove the cartridges from the plastic package, but do not drill any plastic membranes, as this will cause this error when placing the cartridge. The error may also appear if you change a completely empty cartridge: when installing a full cartridge, the printer enters a cleaning cycle, but the printhead has not yet received ink from the newly inserted cartridge. Here are some tips to cancel this error B204:: Solution 1: Remove the cartridges Power the printer for 2 minutes Switch on the printer Install the cartrdiges Solution 2: Switch on the printer Unplug  the power cable Open the cover Move the print head carriage manually to the usual place where it goes for the cartridge change (If the printhead carriage is not movable, reconnect and then turn on the printer, then unplug it again when the head carriage is in the moving position). Change the cartridges. Close the fr