Skip to main content

Error Code list on some printers Canon Pixma

  • E2-2 No paper (ASF)
  • E3-3 Paper jam
  • E4 No ink
  • E5-5 The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
  • E8 Waste ink absorber full, or platen waste ink absorber full
  • E9 The connected digital camera / video camera does not support Camera Direct Printing
  • E14 The Ink cartridges whose destination are wrong
  • E15 Ink cartridge is not installed E16 - Ink remaining is unknown
  • E16 -E19 Failed to scan head alignment sheet
  • E22 Carriage error
  • E23 Paper feed error
  • E24 Purge unit error
  • E25 ASF(cam) sensor error
  • E26 Internal temperature rise error
  • E27 Waste ink absorber full or platen waste ink absorber full
  • E28 Ink cartridge temperature rise error -
  • E29 EEPROM error
  • E33 Paper feed position error
  • E35 15 USB Host VBUD overcurrent error - USB
  • E37 17 Abnormal motor driver error
  • E40 20 Other hardware error
  • E42 22 Scanner error

Comments

Popular posts from this blog

How to fix error B200 on canon Printers

MAJ11/06/17
Error B200 means the printhead voltage or temperature is not normal. The Printhead could be defective.... but first, try these solutions below:


Solution 1:
Disconnect the power cable from the printer.Wait 1 hour.Connect the power cable
Solution 2:
Check and Clean Head contact pin condition of the carriage unitCheck Cable connection especially the carriage FFC
Solution 3:
Turn off the power Open the panel Turn on the power Wait for print carriage to start moving to the left.Let it go past half way Before print carriage reaches left hand side shut the cover. Leave the Printer turned on
Solution 4:
Unplug the power cable.Open the printerPush the whole print head mechanic to the centerWhile the printer still open, plug the power and turn it ON. When the printhead still moving and is going to the very LEFT, close the cover. Wait until its boot up. 
Solution 4a:
Take out all of the ink cartridgesLift up the grey bar by where the ink goesLeft the print head in the middle of the pr…

Service tool V3400 for resetting Canon printers counter

MAJ13/02/18
The Service Tool V3400, and service tool V3600, allow you to reset the waste ink pad counter on some Canon printers: 

You can solve the messages errors "Waste Ink Tank Full" or "Waste Ink Pad Full", "error 5B00" or "Error P07" on these printers:
Canon Pixma iP2700, iP4800, iP4810, iP4840, iP4850, iP4900, iP4910, iP4940, iP4970, iP4980, iP4990, iP5810, iP5880 Canon Pixma MP230, MP240; MP250; MP260; MP270; MP280; MP480; MP490; MP540; MP550; MP560; MP620; MP630; MP640; MP980; MP990; Canon Pixma IX6500, IX6510, IX7000 Canon Pixma IP3600, IP4940 Canon Pixma PRO9000, PRO9500 Canon Pixma MG2120. MG2140, MG2240, MG2250, MG2440, MG3240, MG3140, MG4100, MG4140, MG5140, MG5150, MG5240, MG5340, MG6140, MG6240, MG8140, MG8240 Canon MX397, MX320, MX330, MX370, MX860 etc
Where can you download the Service Tool V3400 ?

It is free here:
https://1fichier.com/?c198556kp0
There is too a paid version here:
V3400 Canon Service Tool for all iPxxxx series, i…

Solving error code 2,140,21 or 2140,21 on Canon printers

MAJ 11/06/17
Error 2,140,21 or 2,157,50 appears on Canon printers when the scanner is used.
"Printer is in use or an error has occurred. Check status. Scanner driver will be closed. Code : 2,140,21"

Solution 1:
On Windows: go to "devices"Click on "Printer"Click on "Stop printing".
Solution 2:
Reinstate the driver of the printer.
Solution 3:
Turn off the firewall
Solution 4:
Sometimes, replacing the cartridge could solve the problem.