Skip to main content

Error 6000 or P03 on Canon printers

Error 6000 or P03 on Canon printers
MAJ11/06/17

Error code 6000, P03 or E23 is a line feed error. It also should be flashing 3 times for this error on the on/off button.

You can have this error on these Canon printers: MP140, MP150, MP160, MP190, MP210, MP220, MP170, MP180, MP450, MP460, MP240, MP250, MP260, MP270, MP480, MP500, MP510, MP520, MP530, MP830, MP540, MP620, MP550, MP560, MP600, MP610, MP630, MP800, MP810, MP830, MP970, MP980, MG2100, MG3100, MG4100, MG5100, MP640, MP990, MG5200, MG5300, MG6100, MG6200, MG8100, MG8200,


Solution 1:
  • Verify that the paper tray is correctly set.
  • If any object is placed in front of the machine, remove it.

Solution 2:
  • Search for any small pieces of paper in the printer, or a tiny object.

Solution 3:
  • Power off the printer
  • Wait 5 minute
  • Power on. 

Solution 4:
  • Clean the encoder strip with a soft cloth
Solution 4a:

Solution 5: one of these parts could be faulty:
  • Timing sensor unit QM2-2683
  • Timing slit disk film QC1-6229
  • Feed roller ass'y QL2-0925
  • Platten unit QM2-2923
  • Logic board ass'y QM2-3078
  • Paper feed motor QK1-1502

Comments

Anonymous said…
Thank's it works for me, a piece of paper jam on timing slit disk film
Anonymous said…
Thanks for the tip. When I opened it to look for a piece of paper stuck inside, I noticed grease on the timing slit disk film. I cleaned it and all is OK.
my printer is not printing.. every time I turn it on it has a loud sound came from some where.. i checked it if it has piece of paper but none... Please help me
Anonymous said…
Great advise! We had two elastics jammed down in there and when we surgically removed them the printer worked again! Thanks!
Michelle Williams BMT, CA said…
Thank you, my book was hanging over the edge and the shelf couldn't open. SO EZ! Thank you again.
Anonymous said…
Worked, some pieces of paper jammed somehow and stuck half under the paperfeeder.
Anonymous said…
I got the 6000 error over and over but could find nothing.
What solved it ?
The door had not been opening automatically, I opened the front paper door manually and the error was gone and printing.

Anonymous said…
I've tried all of the suggestions but it still won't clear! Frustrated.... Stupid printer!
Anonymous said…
got a 6000 error msg overand over untill i cleaned out the print head with cleaning alcohol and a good blow out with a blower
Anonymous said…
Papier uithalen. Het ding afzetten, opnieuw opzetten, een beetje stof vegen, opnieuw afzetten, opnieuw opzetten en dan werkte het.
Anonymous said…
I had the same problem and it was frustrating because nothing appeared jammed?
I tried power down and power back up again but the same fault appeared
However I noticed a previous post and you MUST leave it over 1 minute before powering back up!
Hey presto all is good!
We are trying to install it, brand new, and it is giving this error. It hasn't had paper in yet, obviously not dust etc.
What do we do now?
Jann Lassalle said…
Hi Brenda,

Chek for any piece of packaging inside. If the error still persist, call the Canon support for exchange.
Anonymous said…
I did what the second Anonymous did! Rubbed off the grease part and IT WORKED!!! so so so happy! thank youuu :) yay! don't have to bring it to the shop!
Anonymous said…
Bless your cotton socks! Simple advice can make the world of difference to a busy working mother! A bit of paper stuck down the side which I didn't notice until I peered around a bit more. Thank you Thank you Thank you!!!
Suddenly, my printer won't scan or copy. It'll print, but won't scan or copy, and I receive the Error 6000.
AlleahF said…
Hi there. I'm pretty much thinking my problem is actually a faulty part. When it turns on normally the roller thing rolls... now it starts to roll but then stalls and make a weird sound. Is it really viable to change a part yourself? Or is it time to move on. I've had this printer for a long time.
Jann Lassalle said…
Hi AlleahF,

Try solution 3 here:
http://fix-your-printer.blogspot.fr/2012/09/solving-error-e3-on-canon-printers.html

If problem persist, then a part maybe defective.
Anonymous said…
Thank you so much! Paper jam removed and now working removed!
Glad I checked before ordering a new one
Jezza said…
FINALLY FIXED IT!!! No paper jam, no overhanging items, no other obstructions, power disconnected for 5 mins didn't help either.
I opened the section that you normally open to initiate printer cartridge replacement and noticed a build-up of black ink on the right hand side toward the back. Cleaned it off and bingo. Would be nice if Canon could supply some more helpful support information, i.e. check this, check that, check here, check there, etc. (MX926 Printer)
Anonymous said…
Found a small piece of paper hiding in there! removed it and now it works like a charm
mado said…
Really frustrating as haven't used it much ..and then all of a sudden it was grabbing three or more papers at a time. I pulled it apart to try fix but it is now in the rubbish bin. I wish things were built to last :(
Anonymous said…
Follow ur instruction and DONE !! Printer error coz by paper jam!
Thank u so much
Anonymous said…
Thanks for suggestions. Got 6000 error and power didn't help and print carriage was stuck to the right side. After reading all the suggestions about a piece of something stuck somewhere I unplugged everything and got it where I could see. Found a paper jam in the rear roller. It seems that the printer apparently fed two pages instead of one and the two pages got stuck back there when it tried to duplex to the second side or something (as one of the sides of one of the pages had print on it). Didn't even realize I could pull all that stuff out of the back to get to that roller but glad I poked around.
Anonymous said…
took out paper tray, lifted printer up and there were two jammed pieces of paper. Don't think that an error 6000 was very informative when it could have told me about a jam. Thank you for such a simple fix.
Khim Lee Baw said…
Thank You, Had the same problem on my canon pixma ix6840
Was going mad, till i found out there was a piece of paper jamming my feeder rollers.
Always look for Paper jammed first
Anonymous said…
Canon mx350 with the same problem. No paper jam. No grease. When switched on the printer it made all the normal noises then kind of a grinding sound (not normal). Found when I opened the lid the carriage holding the two ink cartridges didn't move. So, I thought perhaps the carriage wasn't making good contact with the rail. The solution that worked: Switched on the printer with the lid up and gently pushed the carriage toward the rail - the carriage finally moved, but then would stick again. I think I had to try this 15-20 times, and finally it worked. I have successfully printed one page so far. Fingers are crossed that the fix will work for future printings.
Anonymous said…
I tried EVERYTHING above. Twice.
No luck.
Then I just started messing around and noticed that when I took the back cover off to look for a jammed paper there were two sets of lower white "claws." When I went to close this cover it seemed to push one set of claws in.
I opened it again, reset the claws, and closed it slowly and gently.
That seems to have fixed it...
Time will tell!
Anonymous said…
It work for me yay
Anonymous said…
Thank you.
Tried all the above, though never found any white claws! Now covered in ink, but printer is working. Hooray! I'd just purchased a load more ink cartridges.

Popular posts from this blog

How to fix error B200 on canon Printers

MAJ11/06/17
Error B200 means the printhead voltage or temperature is not normal. The Printhead could be defective.... but first, try these solutions below:


Solution 1:
Disconnect the power cable from the printer.Wait 1 hour.Connect the power cable
Solution 2:
Check and Clean Head contact pin condition of the carriage unitCheck Cable connection especially the carriage FFC
Solution 3:
Turn off the power Open the panel Turn on the power Wait for print carriage to start moving to the left.Let it go past half way Before print carriage reaches left hand side shut the cover. Leave the Printer turned on
Solution 4:
Unplug the power cable.Open the printerPush the whole print head mechanic to the centerWhile the printer still open, plug the power and turn it ON. When the printhead still moving and is going to the very LEFT, close the cover. Wait until its boot up. 
Solution 4a:
Take out all of the ink cartridgesLift up the grey bar by where the ink goesLeft the print head in the middle of the pr…

Service tool V3400 for resetting Canon printers counter

MAJ 11/06/17 The Service Tool V3400, and service tool V3600, allow you to reset the waste ink pad counter on some Canon printers: 

You can solve the messages errors "Waste Ink Tank Full" or "Waste Ink Pad Full", "error 5B00" or "Error P07" on these printers:
Canon Pixma iP2700, iP4800, iP4810, iP4840, iP4850, iP4900, iP4910, iP4940, iP4970, iP4980, iP4990, iP5810, iP5880 Canon Pixma MP230, MP240; MP250; MP260; MP270; MP280; MP480; MP490; MP540; MP550; MP560; MP620; MP630; MP640; MP980; MP990; Canon Pixma IX6500, IX6510, IX7000 Canon Pixma IP3600, IP4940 Canon Pixma PRO9000, PRO9500 Canon Pixma MG2120. MG2140, MG2240, MG2250, MG2440, MG3240, MG3140, MG4100, MG4140, MG5140, MG5150, MG5240, MG5340, MG6140, MG6240, MG8140, MG8240 Canon MX397, MX320, MX330, MX860 etc
Where can you download the Service Tool V3400 ?

It is free here:
ST V3400. (but check first for no virus or trojan)
There is too a paid version here:
V3400 Canon Service Tool for all iPxx…